7 Fixes to ‘No GPS - Showing Approximate Location’ on Apple iPhone SE (2020) Waze

With all the hectic days and schedule that we all have, being on time seems to be so challenging. In such demanding situations, we all make sure that to save time and do whatever it takes. When it comes to driving and reaching somewhere on time, knowing about the roads, traffic situations etc matter a lot. And Waze app is such a blessing that can surely help us with these. Not to mention, the app uses GPS services of your device. You can afford any issue with such apps, right. Therefore, in this article, we are going to point out an issue that is “no GPS showing approximate location” in Apple iPhone SE (2020). If you are suffering with the same, please read the article to the end and get solutions.

Part 1: Why Waze shows “No GPS - Showing approximate location” on Apple iPhone SE (2020)

Fixing the issue can be put as secondary thing. What should matter is why such thing happens. Here are some of the causes or reasons that can lead to Apple iPhone SE (2020) no GPS showing approximate location issue. Please read them.

• One of the vital causes may include locations settings that might be invalid. As the app depends on location, having correct locations settings carries weight.
• Apart from invalid location settings, when there is no signal as well as location isn’t updated in your device, the issue is likely to arise.
• The app might refuse to work and may show no GPS if there is an issue like building interference.
• Unarguably, firmware issues know no bounds. If the Apple iPhone SE (2020) device is not updated, you might get this issue easily.

Part 2: Leave the place with poor signals

It is understood that the Waze app runs on GPS. Therefore, having poor signals can be the main cause of why Apple iPhone SE (2020) says “no GPS showing approximate location”. This will not let the location services work properly and therefore arising the issues like these. And hence, as the first thing, we would like to suggest you leaving the place if there are poor or no signals at all. This will do nothing but ruin your mood and app’s performance. Do this and see if the problem goes.

Part 3: Check date & time settings

As the other solution to Waze Apple iPhone SE (2020) 6 no GPS, you must check your date and time settings. A lot of times, the issue comes with incorrect time/location settings. And therefore, here we suggest you to do the following things.

Step 1: Go to “Settings” in the first place.

Step 2: Hit on “General” and tap on “Date & Time”.

Step 3: Toggle off the switch next to “Set Automatically”. If you also want to set 24-hour timings, you can do so by toggling the respective switch.

Step 4: Now, in the date & time settings, tap on “date”. Now, adjust the time according to you.

Step 5: To change the time zones, hit on “Time Zone” in the date and time settings.

Step 6: You can enter the city name and go ahead.

Part 4: Restart your Apple iPhone SE (2020)

One of the most frequently used methods to troubleshoot certain iOS problems is to simply give a restart to your device. Doing this simply terminates all the running background processes and starts the phone freshly. This is what you need to do and see if Waze Apple iPhone SE (2020) no GPS issue gets resolved.

Step 1: Restart basically implies turning your device off and on. To do this, you are supposed to lock press the “Power” or “Sleep/Wake” button.

Step 2: When you see the “Slide to power off” slider, simply drag it to the right and the Apple iPhone SE (2020) device will turn off.

Step 3: Now, press the “Power” button again for long and power on your device.

Part 5: Reset Network and Location & Privacy Settings

If the above methods didn’t help you solving the problem, we would like to do some works with the network as well as location settings. It should be pointed out that when you reset your network settings, it will refresh and remove the entire settings related to networks like VPN, Wi-Fi etc. Also, by following the Location & Privacy settings, these settings will be restored to the default ones. However, this can be a great solution to fix Waze no GPS showing approximate location in iOS. This is what needs to be followed.

To Reset Network Settings:

Step 1: Open “Settings” and go to the “General” option.

Step 2: Once you are in it, scroll down to look for the “Reset” option.

Step 3: Here, simply tap on “Reset Network Settings”. Confirm the actions and you are good to go.

To Reset Location & Privacy Settings, the steps are identical. Just tap on “Reset” followed by “Reset Location & Privacy Settings”.

Part 6: Re-install Waze and grant location permission in settings

There are times when an app fails to work properly. And it can be possible that Waze in your device is not able to discover your location. In such cases, giving a little treatment to the apps can be helpful. So, here is the next fix. Try to install the app once again and give the permissions concerning location when Waze Apple iPhone SE (2020) no GPS issue still arrives. Make sure to follow the steps carefully.

Step 1: On the Home screen, long tap on the Waze icon.

Step 2: It will jiggle a little and you will notice a small x icon at the corner of it.

Step 3: Now, tap on it and confirm to uninstall it.

Step 4: Go to the App Store and install the app once again.

Step 5: Now, head to the “Settings” and tap on”Privacy”.

Step 6: Head to “Location Services” and look for the app.

Step 7: Toggle the switch on to give the location permission. You can choose between “While Using the App” and “Always”.

Part 7: Toggle on and off Wi-Fi and cellular data

Along with the poor signals, poor networks can also act as a great hindrance for no GPS showing approximate location in Apple iPhone SE (2020) problem. And therefore, doing a simple disable and enable can work wonders. This will simply refresh the GPS data and might help you fixing the issue. Follow the steps below.

Step 1: Simply go to the Control Center by swiping up the screen from the bottom.

Step 2: When in the Control Center, make sure to tap on the Wi-Fi icon to turn it off (if it is on and vice versa).

Step 3: Wait for a few seconds and turn it on again. Do the same with Cellular Data icon as well.

Alternatively, you can head to the “Settings” and go to the “Wi-Fi” option to turn off and on. For cellular data, tap “Mobile Data” and turn off and on.

Part 8: Update Apple iPhone SE (2020) to the latest version iOS

It is an undeniable fact that Apple iPhone SE (2020) or any other device provides glitches when not updated. Therefore, as the last resort, we suggest you to check if your iOS is updated or not. Simply follow the steps below and check if Waze no GPS showing approximate location in Apple iPhone SE (2020) still exists.

Step 1: Open “Settings” in your iOS device and head to the “General” tab.

Step 2: Once you are in the next menu, you could see the “Software Update” at the top.

Step 3: Please tap on that and you will be able to see if the update is present or not. If yes, go ahead with the prompts and install it in your device to make things work.

Dr.Fone - Virtual Location

1-Click Location Changer for both iOS and Android

• Teleport from one location to another across the world from the comfort of your home.
• With just a few selections on your computer, you can make members of your circle believe you’re anywhere you want.
• Stimulate and imitate movement and set the speed and stops you take along the way.
• Compatible with both iOS and Android systems.
• Work with location-based apps, like Pokemon Go , Snapchat , Instagram , Facebook , etc.

3981454 people have downloaded it

Conclusion

We have introduced various ways to be followed when there is no GPS showing approximate location on Apple iPhone SE (2020). We hope that you are now help yourselves following the aforementioned steps. Thank you for making time to read this. Help us know your views about this article. Simply give your feedback in the comment section below.

How to See Someone’s Location on Apple iPhone SE (2020)

Locating someone’s iPhone may sound strange, but it can serve the purpose in various situations. For instance**,** you can quickly find the location of your teenage children to check whether they are involved in an untrusted environment or not. Or, you can track the location of your husband if you have concerns regarding his affair through his iPhone.

This article will address three methods for seeing someone’s location on Apple iPhone SE (2020) accurately and within no time. Moreover, we will also recommend a third-party tool to fake your location to prevent others from tracking you.

Part 1: How to See Someone’s Location on Apple iPhone SE (2020) using Find My iPhone

Find My iPhone is one of the popular apps to locate iPhones effectively. iPhone users utilize this app to navigate lost or stolen phones efficiently. Through this app, you can also learn how to check someone’s location on Apple iPhone SE (2020) through their iCloud. First, make sure to activate Find My Apple iPhone SE (2020) feature in the target’s iCloud settings. After that, you can easily see the targets’ location on your Apple iPhone SE (2020) from your screen with a few clicks.

Steps to See Someone’s Location on Apple iPhone SE (2020) through Find My iPhone

Step 1: Initiate activating the feature of Find My iPhone on the target’s phone. For this, navigate to the “Settings” of the target iPhone. Then find and click on the option of “iCloud,” where you will see the feature “Find My iPhone.” Next, turn on its toggle by tapping on it.

Step 2: Now, you are ready to locate the target’s iPhone location anytime you wish. To do so, access the official website of iCloud and log in to the target’s iCloud account carefully.

Step 3: A new window will appear on your screen from where you click on the option “Find My iPhone.” Now you can see all of the iOS devices attached to this account. Choose the Apple iPhone SE (2020) device from the options you want to locate on the map.

Other Features

Find My iPhone offers numerous other features that can help you to find lost or stolen phones effortlessly. Through this app, you can play a sound on your lost iPhone for 2 minutes, even if the iPhone is on silent mode. You can also get easy and clear directions through this app towards the exact location of your phone. Moreover, if your Apple iPhone SE (2020) gets stolen, you can lock your device through a passcode and can erase all the data from it with a single click.

Part 2: How to Find Someone’s Location on Apple iPhone SE (2020) via Find My Friends

Find My Friends is another helpful app through which you can track someone’s location easily. Your friends and family members can share their location through this app, and they can also start following your location simultaneously. Moreover, you can set location-based alarms in case you have to pick up someone from the school or airport.

Through this particular app, you can also try how to find someone’s location on Apple iPhone SE (2020) efficiently. First, however, you should be remindful of the following two factors before locating someone’s location on Apple iPhone SE (2020) through this app:

• The suitable users for locating someone’s location on Apple iPhone SE (2020) are those who have an evident reach to the target’s iPhone and are also included in the contact list of that particular phone.
• Through this app, you cannot observe someone’s location in an incognito mode as the target iPhone owner can easily check if someone is navigating their location once they open the Find My Friends app. Also, a notification will pop up on the target’s iPhone regarding their shared location.

Steps on How to Track Someone’s iPhone via Find My Friends

Step 1: Install the “Find My Friends” app on the target’s iPhone to start. Remember that the “Find My Friends” app is only available on iOS 12 or below. IOS 13 users need to install the “Find My” app to proceed.

Step 2: After installing the app on the target’s phone, open it and tap on the contact picture to activate the toggle called “Share My Location.”

Step 3: To begin sharing the location of the target’s phone to your device, swipe up on your Apple iPhone SE (2020) to use AirDrop and make your Apple iPhone SE (2020) discoverable by clicking on “Everyone.” Tap “Add” on the target device and then choose the option of “Share Indefinitely.”

Step 4: You would receive a notification message asking for permission to accept the target’s location and share your location on your Apple iPhone SE (2020). Tap on “Don’t share” to locate the target’s phone without sharing your location. Now on the Find My Friends app, you can easily see the location of the target’s iPhone along with its contact icon.

Part 3: How to Check Someone’s Location on Apple iPhone SE (2020) by iMessage

Another way to track someone’s location on Apple iPhone SE (2020) is through the iMessage app. This app enables the users to have internet-based conversations with their friends and family members and improves features. Also, all the messages are secured via end-to-end encryption for data privacy security. You can also share stickers and emojis through this special app.

iMessage has a hidden feature through which you can also know how to see someone’s location on Apple iPhone SE (2020). Thus, by using this app, you can easily reach the location of your target’s phone.

Steps to Find Someone’s Location through iMessage

Step 1: Grab the target’s iPhone and click to open the iMessage app. Then find your contact name and start a conversation with yourself.

Step 2: Now tap on the contact icon and then click on the info icon from where you would see different options. Tap on “Share My Location” and set the time duration of location sharing. You can set the time for 1 hour, 24 hours, or indefinitely.

Step 3: On your Apple iPhone SE (2020), join the location sharing of the target’s phone and do not permit to share your location. Thus, you can easily track the target’s location on your Apple iPhone SE (2020) via iMessage.

Part 4: Fake Location on Apple iPhone SE (2020) to Avoid Others from Tracking You

You can effortlessly hide your current location to prevent others from tracking your location unnecessarily. To do so, use Dr.Fone – Virtual Location, which can easily fake your location so that nobody can access your exact location. Furthermore, with a single click, you can set your phone’s GPS anywhere. Hence, you can travel across the globe without leaving your home via this excellent app.

Dr.Fone - Virtual Location

1-Click Location Changer for both iOS and Android

• Teleport from one location to another across the world from the comfort of your home.
• With just a few selections on your computer, you can make members of your circle believe you’re anywhere you want.
• Stimulate and imitate movement and set the speed and stops you take along the way.
• Compatible with both iOS and Android systems.
• Work with location-based apps, like Pokemon Go , Snapchat , Instagram , Facebook , etc.

3981454 people have downloaded it

Ultimate Steps to Use Dr.Fone – Virtual Location

Step 1: Select Virtual Location

Start with launching the Dr.Fone tool on your computer and open the tool to click on “Virtual Location” on its home page.

Step 2: Connect your Phone

Now connect your phone to the computer and tap on the option “Get Started” on the computer’s screen. You can check your current location on the map on the new page. You can also click on the icon “Center on” to instantly see your current location on the map.

Step 3: Enable Teleport Mode

Now enable the teleport mode by tapping on its icon displayed on the upper right of the screen. Afterward, type the place you want to use a location on the search box and tap on the “Go” option. A pop-up box will display where you click on “Move Here” for confirmation. Now your location has been changed with the place you have selected before so that you can fake your current location.

Conclusion

Through this detailed guide, you can quickly learn how to quickly see someone’s location on Apple iPhone SE (2020). For diversity, we have discussed three reliable apps that can help you navigate someone’s location accurately. However, if you want to fake your location to prevent others from tracking you, we have recommended Dr.Fone – Virtual Location tool, which works precisely in this scenario.

How to View GPX Files: Online and Offline Solutions Of Apple iPhone SE (2020)

Also known as GPS Exchange Format, GPX is one of the most resourceful file types that is used to store and import/export map-related data. Ideally, a lot of people use GPX files to access a particular route offline when they are off the grid. Though, there are times when users find it hard to view GPX on a map. Don’t worry, there are plenty of ways to view GPX online or offline. In this post, I will let you know how to view GPX in Google Maps and other resourceful desktop applications in detail.

Part 1: What Can you Do with GPX Files?

Before we discuss how to utilize a GPX view online or offline tool, let’s quickly consider how these files work. It stands for GPS Exchange format and stores map-related data in an XML format. Apart from XML, KML and KMZ are other common file formats to store GPX data.

From the exact coordinates of places to their routes, a GPX file would contain the following information:

• Coordinates: Also know as waypoints, a GPX file would contain details about longitude and latitude that are needed to be covered on the map.
• Routes: The main reason for using GPX files is that they store detailed routing information (the path that we need to take to reach from one point to another).
• Tracks: A track consists of various points that we are merged to form the route or the path.

Let’s suppose you have devised a route between two points that you would need later on. You can now export the GPX file from the application and even import it to the same or another application. When you use the GPX viewer, it will let you access the route offline without an active internet connection. That’s why GPX files are used to view a route offline while hiking, trekking, cycling, and do other offline activities.

Part 2: How to View GPX Files Online in Google Maps?

The good thing is that there are tons of options to view GPX online on desktop, Android, or iOS platforms. Some of these freely available solutions to view GPX on Map are Google Earth, Google Maps, Bing Maps, Garmin BaseCamp, GPX Viewer, and so on.

Out of them, Google Maps is one of the most used solutions to view GPX online on smartphones and desktops alike. As of now, you can import GPX files in the KML format or even load CSV files of exact coordinates on Google Maps. To learn how to view GPX in Google Maps, follow these steps:

Step 1: Go to Your Places in Google Maps

To view GPX on the map, you can first head to the official website of Google Maps on your computer. Now, just click on the hamburger (three-line) icon from the top-left corner to access its options.

This will display various options related to your Google Maps account. From here, you can just click on the “Your Places” feature.

Step 2: Choose to Create a New Map

As a dedicated section of “Your Places” would be launched, you can view all the saved places for your Google Maps account. Here, you can go to the “Maps” tab to view the existing saved route and spots. Since you have to view GPX in Google Maps, you can click on the “Create Map” option from the bottom to load a new map.

Step 3: Import and View the GPX File Online

This will make Google Maps load a new page that will let you create a fresh map as per your preferences. Here, you can just click on the “Import” button to load a browser window from where you can directly load a GPX file on Google Maps and make it available offline as well.

Part 3: How to View a GPX File Offline with Dr.Fone – Virtual Location?

Besides Google Maps, you can also take the assistance of Dr.Fone – Virtual Location to view GPX files on your computers offline. Since it is a desktop tool, it would let you load any GPX file without being connected to an active internet connection. Besides that, the application can also be used to spoof the location of your iOS device or simulate its movement in a route without jailbreaking it.

Therefore, if you want, you can first simulate the movement of your device and export the GPX file. Later, you can import the saved GPX file and simulate your Apple iPhone SE (2020) movement in the same route without any trouble.

Step 1: Launch Dr.Fone – Virtual Location and connect your Apple iPhone SE (2020)

At first, you can just connect your Apple iPhone SE (2020) using a working lightning cable and launch the Dr.Fone – Virtual Location application. Once your device is detected, just click on the “Get Started” and agree to its terms and conditions.

Step 2: Simulate the Movement of your Apple iPhone SE (2020)

The application would automatically detect your Apple iPhone SE (2020) on the interface with its present location. To simulate its movement, you can click on the Multi-stop or One-stop Mode icons from the top.

You can now drop the pin in a route on the map and click on the “Move Here” Button to start simulating the movement.

Subsequently, you can select the number of times you want to cover the route and click on the “March” button. The application will even let you select a preferred speed for the movement.

Step 3: Export or Import the GPX Files

Once you have loaded the map on the interface, you can easily save it offline as a GPX file. To do that, just click on the Export icon from the floating menu on the side.

Similarly, you can also import a GPX file directly to the Dr.Fone application. To do this, you just have to click on the “Import” icon from the sidebar. This will open a browser window, letting you go to a location on your computer where the GPX file is saved.

Once the GPX file is loaded, you can simply wait for a while and let the application process it without closing it in between.

As you can see, it is pretty easy to view GPX online or offline using the right tools. In this post, I have included a detailed guide on how to view GPX in Google Maps. Besides that, I have also included another solution to view GPX on a map using Dr.Fone - Virtual Location (iOS). Apart from importing/exporting GPX files, the application can also be used to spoof your Apple iPhone SE (2020)’s location or simulate its movement virtually from anywhere you want.

Also read: