7 Fixes to ‘No GPS - Showing Approximate Location’ on Apple iPhone 13 Waze

With all the hectic days and schedule that we all have, being on time seems to be so challenging. In such demanding situations, we all make sure that to save time and do whatever it takes. When it comes to driving and reaching somewhere on time, knowing about the roads, traffic situations etc matter a lot. And Waze app is such a blessing that can surely help us with these. Not to mention, the app uses GPS services of your device. You can afford any issue with such apps, right. Therefore, in this article, we are going to point out an issue that is “no GPS showing approximate location” in Apple iPhone 13. If you are suffering with the same, please read the article to the end and get solutions.

Part 1: Why Waze shows “No GPS - Showing approximate location” on Apple iPhone 13

Fixing the issue can be put as secondary thing. What should matter is why such thing happens. Here are some of the causes or reasons that can lead to Apple iPhone 13 no GPS showing approximate location issue. Please read them.

• One of the vital causes may include locations settings that might be invalid. As the app depends on location, having correct locations settings carries weight.
• Apart from invalid location settings, when there is no signal as well as location isn’t updated in your device, the issue is likely to arise.
• The app might refuse to work and may show no GPS if there is an issue like building interference.
• Unarguably, firmware issues know no bounds. If the Apple iPhone 13 device is not updated, you might get this issue easily.

Part 2: Leave the place with poor signals

It is understood that the Waze app runs on GPS. Therefore, having poor signals can be the main cause of why Apple iPhone 13 says “no GPS showing approximate location”. This will not let the location services work properly and therefore arising the issues like these. And hence, as the first thing, we would like to suggest you leaving the place if there are poor or no signals at all. This will do nothing but ruin your mood and app’s performance. Do this and see if the problem goes.

Part 3: Check date & time settings

As the other solution to Waze Apple iPhone 13 6 no GPS, you must check your date and time settings. A lot of times, the issue comes with incorrect time/location settings. And therefore, here we suggest you to do the following things.

Step 1: Go to “Settings” in the first place.

Step 2: Hit on “General” and tap on “Date & Time”.

Step 3: Toggle off the switch next to “Set Automatically”. If you also want to set 24-hour timings, you can do so by toggling the respective switch.

Step 4: Now, in the date & time settings, tap on “date”. Now, adjust the time according to you.

Step 5: To change the time zones, hit on “Time Zone” in the date and time settings.

Step 6: You can enter the city name and go ahead.

Part 4: Restart your Apple iPhone 13

One of the most frequently used methods to troubleshoot certain iOS problems is to simply give a restart to your device. Doing this simply terminates all the running background processes and starts the phone freshly. This is what you need to do and see if Waze Apple iPhone 13 no GPS issue gets resolved.

Step 1: Restart basically implies turning your device off and on. To do this, you are supposed to lock press the “Power” or “Sleep/Wake” button.

Step 2: When you see the “Slide to power off” slider, simply drag it to the right and the Apple iPhone 13 device will turn off.

Step 3: Now, press the “Power” button again for long and power on your device.

Part 5: Reset Network and Location & Privacy Settings

If the above methods didn’t help you solving the problem, we would like to do some works with the network as well as location settings. It should be pointed out that when you reset your network settings, it will refresh and remove the entire settings related to networks like VPN, Wi-Fi etc. Also, by following the Location & Privacy settings, these settings will be restored to the default ones. However, this can be a great solution to fix Waze no GPS showing approximate location in iOS. This is what needs to be followed.

To Reset Network Settings:

Step 1: Open “Settings” and go to the “General” option.

Step 2: Once you are in it, scroll down to look for the “Reset” option.

Step 3: Here, simply tap on “Reset Network Settings”. Confirm the actions and you are good to go.

To Reset Location & Privacy Settings, the steps are identical. Just tap on “Reset” followed by “Reset Location & Privacy Settings”.

Part 6: Re-install Waze and grant location permission in settings

There are times when an app fails to work properly. And it can be possible that Waze in your device is not able to discover your location. In such cases, giving a little treatment to the apps can be helpful. So, here is the next fix. Try to install the app once again and give the permissions concerning location when Waze Apple iPhone 13 no GPS issue still arrives. Make sure to follow the steps carefully.

Step 1: On the Home screen, long tap on the Waze icon.

Step 2: It will jiggle a little and you will notice a small x icon at the corner of it.

Step 3: Now, tap on it and confirm to uninstall it.

Step 4: Go to the App Store and install the app once again.

Step 5: Now, head to the “Settings” and tap on”Privacy”.

Step 6: Head to “Location Services” and look for the app.

Step 7: Toggle the switch on to give the location permission. You can choose between “While Using the App” and “Always”.

Part 7: Toggle on and off Wi-Fi and cellular data

Along with the poor signals, poor networks can also act as a great hindrance for no GPS showing approximate location in Apple iPhone 13 problem. And therefore, doing a simple disable and enable can work wonders. This will simply refresh the GPS data and might help you fixing the issue. Follow the steps below.

Step 1: Simply go to the Control Center by swiping up the screen from the bottom.

Step 2: When in the Control Center, make sure to tap on the Wi-Fi icon to turn it off (if it is on and vice versa).

Step 3: Wait for a few seconds and turn it on again. Do the same with Cellular Data icon as well.

Alternatively, you can head to the “Settings” and go to the “Wi-Fi” option to turn off and on. For cellular data, tap “Mobile Data” and turn off and on.

Part 8: Update Apple iPhone 13 to the latest version iOS

It is an undeniable fact that Apple iPhone 13 or any other device provides glitches when not updated. Therefore, as the last resort, we suggest you to check if your iOS is updated or not. Simply follow the steps below and check if Waze no GPS showing approximate location in Apple iPhone 13 still exists.

Step 1: Open “Settings” in your iOS device and head to the “General” tab.

Step 2: Once you are in the next menu, you could see the “Software Update” at the top.

Step 3: Please tap on that and you will be able to see if the update is present or not. If yes, go ahead with the prompts and install it in your device to make things work.

Dr.Fone - Virtual Location

1-Click Location Changer for both iOS and Android

• Teleport from one location to another across the world from the comfort of your home.
• With just a few selections on your computer, you can make members of your circle believe you’re anywhere you want.
• Stimulate and imitate movement and set the speed and stops you take along the way.
• Compatible with both iOS and Android systems.
• Work with location-based apps, like Pokemon Go , Snapchat , Instagram , Facebook , etc.

3981454 people have downloaded it

Conclusion

We have introduced various ways to be followed when there is no GPS showing approximate location on Apple iPhone 13. We hope that you are now help yourselves following the aforementioned steps. Thank you for making time to read this. Help us know your views about this article. Simply give your feedback in the comment section below.

Does iTools virtual location not work On Apple iPhone 13/iPad?

 You must know that iTools virtual location is used worldwide, and it has been reported that there have been many problems. This effective iTools virtual location is a geo-spoofing tool that is mainly for iOS. With this tool, you could easily mock the GPS location, and it also works in an effective manner to access geo-restricted content.

Part 1: Why does my itools not work on Apple iPhone 13/iPad?

There may be many reasons due to which the iTools virtual location does not work on Apple iPhone 13/iPad. You must know that iOS 14 is the massive iOS update, but it is the amazing new features that offer a completely new look to your iOS. But iTools not working on Apple iPhone 13/iPad could make it difficult for the user to use this tool.

With the introduction of the iTools virtual location, many people have been complaining about the issues they are facing using this tool. Some of the common issues are getting stuck in the developer mode, iTools not downloading, Map crash, iTools fail to work, location won’t move, image load failed, and much more. All these issues are making the use of iTools more difficult for the user to use.

Usually the reasons lie with bad internet, Wi-Fi or outdated version of the tool. Let us know in the following section how you can deal with various issues that lead to iTools not working on Apple iPhone 13/iPad.

Part 2: Ways to fix the iTools not work on Apple iPhone 13/iPad

iTools Virtual Location is the perfect tool that helps you to spoof location effectively. But there are many iTools not working problems that you may encounter in these tools some of them are like as mentioned below:

1. Stuck in developer mode

This problem is the most common issue that people mainly face with the iTools virtual Location. When you are stuck in the developer mode, you may notice that the application won’t initiate, and it also stops your navigation to the next step. This can be triggered if your iTools is not in the updated version. And hence, in order to resolve this problem, you may update the latest version of iTools on the official website.

2. iTools map not showing

Many of the people are also facing a problem like they cannot see the map while using a particular tool. This problem may be due to an unstable internet connection. Hence you must check with the internet connection to resolve the problem. Or you may also restart the tool and initiate the geo spoofing process.

There are also different ways or you can say some basic ways to go along with whenever iTools doesn’t work. You must know these basic tips when you stuck with such issue with your iOS 14. These are mentioned below:

Step 1: iTools download ios 14 must be of the latest iTools virtual location from the official website.

Step 2: Get a stable internet connection for running the geo spoofing.

Step 3: Restart the tool if you are stuck in any step or the application crash.

Step 4: Keep the tool updated for effective use.

The above mentioned are some of the steps you must follow to avoid any problem while using the iTools on Apple iPhone 13/iPad.

Part 3: Better alternative for iTools virtual location

Dr.Fone Virtual Location (iOS) is an effective and popular tool that could be easily used to change your GPS location to any place you want to change. With this popular tool, you could set any location anywhere in the world by creating a virtual location on iOS. It is the perfect tool that helps you to fake or spoof your location. The best thing about this software is that it is free and safe to use. And with its attractive features, you would love to browse and fake your Apple iPhone 13’s real-time location.

Key Features

Some of the key features of Dr.Fone – Virtual Location (iOS) that is making is popular all over the globe are mentioned below:

• It helps you to teleport iPhone GPS to anywhere in the world easily and quickly.
• It is the perfect solution to simulate GPS movement along real roads or paths you draw.
• With the help of the joystick, you could easily make the movement of the GPS freely.
• It is the best tool that supports five devices of location management that too in a perfect manner.

Step by Step Tutorial

If you want to know how to use the Dr.Fone – Virtual Location (iOS) to fake Location, then do not worry. Here you could get some of the simple tips to use Dr.Fone – Virtual Location (iOS) to fake your location using “Teleport” mode. With only three steps, you could easily change the GPS location on your Apple iPhone 13. The simple steps are mentioned below:

Step 1: Launch the program on your computer

The first step you need to do to use the program is to download and install it from the official website. You must click on the “Virtual Location” from all the options.

Now, have your phone connected to your computer. Then click on the “Get Started” option.

Step 2: Find your actual location on your map

In the second step, you need to find your actual location on your map in the new window. Check that the location is accurately displayed or not. If in case the location is not accurately displayed, then click the Centre On icon. You may find the Centre On icon in the lower right part to show the accurate location.

Step 3: Activate the teleport mode

Now, you need to activate the teleport mode by clicking the corresponding icon. You may find the corresponding icon in the upper right corner, and then you need to enter the place that you want to teleport in the upper left field and then click on the “Go” option.

Step 4: Click on the Move Here option

Now you may notice that the system would be able to understand your desired location. Hence click on the popup box of “Move Here.”

Step 5: The location will display on the program and app

In the last step, click the Centre On option. You will find that your location changes and is displaying on the program and app.

Conclusion

iTools ios 14 is designed as a powerful file management tool for all iPhones. Also, it is a greta choice to get your location spoofed on your Apple iPhone 13. But still, there are many virtual location issues that can break your comfort and lead you to disappointment. However, the problem can be effectively resolved with the help of Dr.Fone – Virtual Location (iOS) as it is the best alternative to iTools. Hence, use this perfect tool to resolve your iTools not work with ios 14 in the best possible manner.

Why Does iTools Virtual Location Not Work For Apple iPhone 13/iPad? Solved

It is no secret that a multiplicity of users across the globe have reported a bunch of problems using iTools Virtual Location. These problems vary in magnitude and make iTools Virtual Location not work. In this article, we are going to dig into probable causes and solutions for iTools Virtual Location that fails to work.

Common Issues That iTools Virtual Location Not Working

Although iTools can be of great help in mocking your GPS location, the tool is marred by a plethora of shortcomings. Lots of users have been perennially complaining about some flaws of iTools Virtual Location. Some of the common issues are:

• Developer mode- There are myriads of cases reported by users where iTools crash on developer mode and get stuck here. This mode prevents users from going on to faking GPS location.
• Not downloading- Sometimes, you can follow all necessary processes or satisfy all the requirements, but iTools fails to download to your device. There is no way you can install iTools without downloading it.
• Map crash- Plenty of iTools users have launched over map crash. The program gets stuck loading the map but fails to display the map. Even when the internet connection is established, the map still fails to load in some cases.
• Stop working- ITools failure to work is one of the common issues fronted by scores of users. When you try to change the location, iTools Virtual Location does not respond.
• Not working on iOS 17- If there is an iOS version that hasn’t gone well with ITools is iOS 17. Although iTools has given a temporary solution for this, it still fails to work on some phones.
• Location won’t move- When using iTools Virtual Location, you always provide the desired GPS location data and click “Go.” After that, you are asked to click the “Move here” button to move to the chosen place. However, users have complained that at times the location fails to move from the previous to the currently selected location on apps like Facebook, and you end up finding yourself in a fake location.
• Image load failed- Image loading failure is a common problem amongst iOS 17 users. Droves of users complain they continually get a developer image load failed. The program fails to load various location images, and thus users cannot see the respective location images. The screen is stuck in loading without displaying any image.

Tips: iTools Virtual Location not working? Switch to Dr.Fone - Virtual Location for flawless GPS control. Try it now and never lose your way!

How to Solve These Issues?

With the significant problems mentioned, it’s prudent for someone to ask now what the solution is. Of course, these issues are triggered differently, but there are respective common fixes. However, some can successfully fix the problem while other solutions may hit the blank. Let’s see some of the probable solutions to the issues mentioned above.

• Developer mode- The solution is to check for the iTools updates for your device.
• Not downloading- if the program fails to download, check that your device meets the system requirements. Also, make sure your payments are settled and that the internet connection is established.
• Map crash- If the map crashes, it might be because of a problem with the google map API or unestablished communication with iTools. If Google Maps fails, click the three horizontal lines located at the right of the menu bar and switch to Mapbox. Also, check that your internet connection is working fine. If not, try to refresh your internet connection and ensure the connection is established.
• Stop working- When the iTools Virtual Location stops working, it might be due to unexpected technical issues. Try restarting the program, and if it persists, restart your device.
• Not working on iOS 17- As aforementioned, iOS 17 has had issues with iTools. One of the best ways to ensure a smooth click with iTools is to downgrade your iOS 17 to say iOS 16. The temporary solution offered for iOS 17 seems to work on some devices only.
• Location won’t move- when you change your current location and fail to move on your apps say google maps or Facebook, you will find yourself in fake location. Simply restart your device, and the problem will disappear.
• Image load failed- This issue is often related to compatibility issues. Check if you downloaded the program after the forced PoGo updates. You can try downgrading your device if you are doing iOS 17.

Dr.Fone - Virtual Location: Safer and Stable Tool To Change Location (iOS 17 Supported)

As you have seen above, iTools Virtual Location software is faced with a pile of problems that make it difficult to safely and efficiently fake GPS locations. So no one should teach you that you need a better tool. Yes, a stable and safe tool for changing location as you desire.

There are several tools out there claiming to offer such, but none comes close to Dr.Fone - Virtual Location (iOS/Android) . The powerful iOS location changer has all it takes to make location changing easy and full of fun. This program has a simple and straightforward interface that eases every user’s navigation. With the three simple steps to change GPS location on your device, Dr.Fone is no doubt the location changer you have been looking for. The program is available for all versions of windows including Windows 11/10/8.1/8/7. Some of the features of Dr.Fone - Virtual Location (iOS/Android) include:

• Teleport your Apple iPhone 13/Android GPS worldwide- if you are using GPS-based gaming applications, you can track and change your current GPS location via a single click. So every app on your device that uses GPS location data will believe you are there when you are mocking your location.
• Adjust the speed to transition from static to dynamic GPS mocking. You can mimic the cycling, walking, or driving speed on real roads or on a user- defined route established by choosing two points. To make your movements more natural, you can add relevant pauses along the journey as per your needs.
• Use Joystick to simulate GPS movement- the use of Joystick will save up to 90% of the labor involved in GPS movement control. Whichever mode you are in as either one-stop, multi-stop, or teleport mode.
• Automatic marching- with one click, you can make GPS spot the move automatically. You can change the directions in real time.
• Change directions up to 360 degrees- use the direction arrows to set the desired movement direction.
• Works with all GPS- based AR games or apps.

Dr.Fone - Virtual Location

1-Click Location Changer for both iOS and Android

• Teleport from one location to another across the world from the comfort of your home.
• With just a few selections on your computer, you can make members of your circle believe you’re anywhere you want.
• Stimulate and imitate movement and set the speed and stops you take along the way.
• Compatible with both iOS and Android systems.
• Work with location-based apps, like Pokemon Go , Snapchat , Instagram , Facebook , etc.

3981454 people have downloaded it

Also read: